Brass Dual-Threaded Insert for Wooden Tap Handles
DIY Beer Tap Handle Inserts - Dual Threaded - 3/8″-16 threads, .625″ Length
Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.
All you'll need is a 12.7mm (1/2") Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple ect) Then screw in with a large flat screw driver.
It is important not to push down too hard if you're going to be using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.
Suits NukaTap and Intertap taps
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Brass Dual-Threaded Insert for Wooden Tap Handles
Brass Dual-Threaded Insert for Wooden Tap Handles
DIY Beer Tap Handle Inserts - Dual Threaded - 3/8″-16 threads, .625″ Length
Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.
All you'll need is a 12.7mm (1/2") Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple ect) Then screw in with a large flat screw driver.
It is important not to push down too hard if you're going to be using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.
Suits NukaTap and Intertap taps
Original: $2.27
-65%$2.27
$0.79Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DIY Beer Tap Handle Inserts - Dual Threaded - 3/8″-16 threads, .625″ Length
Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.
All you'll need is a 12.7mm (1/2") Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple ect) Then screw in with a large flat screw driver.
It is important not to push down too hard if you're going to be using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.
Suits NukaTap and Intertap taps
